懸臂斗輪取料機
周先生 13906278080 丁寶勤 13906276368
電話：0513-88400999 傳真：0513-88400998 郵箱：jszk@vip.163.com
懸臂斗輪取料機是鋼廠、電廠、碼頭等企業原料場物料均化設備。我司目前具有取料能力600t/h~3000t/h各種規格。懸臂斗輪取料機由斗輪機構、上部金屬結構、變幅機構、回轉機構、走行機構、電氣室、司機室電氣控制系統等組成。
工作時，主機行走至將要取料料堆位置，地面出料皮帶啟動運行后，懸臂皮帶機啟動運行。隨后斗輪機構及回轉機構運行開始取料，變幅機構配合取料作周期性動作。取料作業可分為定點取料和同層平移取料二種方法。
Bucket wheel boom reclaimer is the mix the uniform equipment and used in the steel mill，power plant, wharfz disperses a grain of material, at present we have take material ability 600t/h-3000t/h each kind of specification. The bracket bucket, wheel reclaimer consists of the bucket, wheel organization, upside the metal structure. the amplitude organization, the swiveling mechanism, walks the good organization, the electric panel room, the cab electric control system and so on.
When working，the main engine walks to is going to take the material material to pile the position, after the ground leaves the material leather belt starts the movement, the bracket belt fastener starts the movement. Afterward the bucket-wheel organization and the swiveling mechanism movement starts to take the material, the amplitude organization matches the conjunction material to make the periodic movement. Takes the material work to be possible to divide Into the fixed point to take the material and to take the material two methods with the level，translation.
技術參數表|Technical Date
|
性能參數名稱 |
單位 |
LDQ1600 2400/35 |
LDQK600 1000/25 |
LDQZ800 1200/37.5 |
LDQK1100 1200/25 |
LDQZ1200 1600/40 |
LDQK1250 2000/30 |
LDQK1500 1500/45 |
LDQK1600 2500/30 |
LDQZ2500 7500/55 |
|
|
生產能力 |
堆料 取料 |
t/h t/h |
2400 1600 |
1000 600 |
1200 800 |
1200 1100 |
1600 1200 |
2000 1250 |
1500 1500 |
2500 1600 |
7500 2500 |
|
堆取高度 |
軌上 軌下 |
m m |
12 2 |
10 1 |
12 1 |
11 1 |
11 1 |
12 1.5 |
12 2 |
12 1.5 |
12 2 |
|
物料特性 |
堆比重粒度 |
t/h3 mm |
2.2 <100 |
1.6-3.0 <100 |
0.5-2.2 <100 |
0.5-2.5 <100 |
2.2 <100 |
1.8-2.4 <100 |
2.2 <100 |
0.8-1 <100 |
2.2 <100 |
|
回轉機構 |
回轉半徑回轉角度 |
m ()° |
35 ±110 |
25 ±110 |
37.5 ±110 |
25 ±110 |
40 ±110 |
30 ±110 |
45 ±110 |
30 ±110 |
55 ±110 |
|
前臂皮帶機 |
帶寬 帶速 |
mm m/s |
1400 3.15 |
1000 2.5 |
1200 2 |
1200 2 |
1200 1.6 |
1200 2.5 |
1000 2.5 |
1600 3.15 |
1800 3.15 |
|
軌距輪壓調車速度工作速度薦用鋼軌 |
M Kn m/min m/min kq/m |
8 268 30 7 P50 |
6 250 30 5 P50 |
6 230 30 7 P50 |
6 250 30 7 P50 |
8 250 30 7 P50 |
7 250 30 7 P50 |
8 250 30 7 P50 |
7 250 30 7 P50 |
9 250 30 7 P50 |
|
|
裝機總容量 |
總功率 |
kw |
472 |
222 |
285 |
220 |
380 |
300 |
320 |
330 |
690 |
|
常用功率 |
kw |
440 |
148 |
220 |
160 |
330 |
220 |
300 |
280 |
670 |
|
|
電源 |
電壓 |
V |
10000 |
380 |
6000 |
6000 |
6000 |
10000 |
6000 |
10000 |
10000 |
|
供電方 |
V |
動力電纜卷筒滑線 |
|||||||||
|
控制方式 |
|
|
通訊電纜卷筒無線 |
||||||||
