PCD反擊型錘式破碎機
丁寶勤 13906276368(技術) 周龍泰 13606279370(商務)
電話：0513-88400999 傳真：0513-88400998 郵箱：jszk@vip.163.com
本系列產品進料粒度大，采用結構DuTe、無鍵聯接、高鉻板錘、DuTe的反擊襯板，也可以調節排料粒度大小。該產品可以直接將粒度為600-1800mm的物料破碎至25或20mm以下。主要用于水泥、建材、礦山、化工等工業部門破碎脆性，中硬、含水性不大的物料，如石灰石等。物料的抗壓強度不超過140MPa。
This series of product is a new product after the optimized design of he company. It has a large feeding particle size.lt adopts unique structure, keyless connection,high chrome hammer.and unique impact liner.The particle size can be adjusted.The product can directly crush materials with a maximum particle size of 600-1800mm into the size less than 25 to 20mm.lt is mainly used for crushing brittle and medium-hard materials such as limestone with a low moisture content in the industries of cement, mining.chemical industry,etc.The compressive strength of materials shall not exceed 140Mpa.
產品特點Product features
■破碎比大
Large crushing ratio
■產品形狀呈立方體
Cubic shape
■進料粒度大
Large feeding size
■排料粒度大小可調，簡化破碎流程
Discharging particle size is adjustable,the crushing process is simplified
■錘頭壽命長，綜合運行成本降低
Hammerhead has a long life,and the comprehensive operating costs are reduced
■高效節能Energy-efficient
技術參數表I Technical Date
|
型號 |
轉子直徑×轉子寬度(mm) |
進料邊長上限(mm) |
出料粒度(mm) |
生產能力(t/h) |
功率(kw) |
重量 （t） |
|
PCD1609 |
1680×918 |
600 |
25-75 |
50-70 |
132 |
23900 |
|
PCD1612II |
1680×1250 |
850 |
25-75 |
100-140 |
220 |
29000 |
|
PCD2014 |
2000×1480 |
1200 |
25-75 |
150-250 |
355 |
49800 |
|
PCD2519 |
2530×1900 |
1500 |
25-75 |
250-450 |
710 |
94200 |
|
PCD2425 |
2740×2550 |
1500 |
25-75 |
700-800 |
1400 |
129900 |
|
PCD2428 |
2740× 2720 |
1850 |
25-75 |
800-900 |
1400 |
140000 |
上一頁：PCF單段錘式破碎機
下一頁：
